RT 回转气压夹盘_其他卡盘_软爪_硬爪_扇形爪_NTH液压卡盘_NTH油压缸_NTH手动卡盘

物品体现

其他卡盘

RT 回转气压夹盘

RT ROTARY AIR CHUCK FIXTURES 打开网页设备图片集变大

在线询盘

产品详细介绍

轻磨削工作适宜 Suitable for light cutting 回转式气压夹盘适用於分度盘，具可随分度盘主轴旋转功能，动力夹持加工物作角度分割或旋转切削。
It’s ideal for dividing or cutting work pieces by mounting the chuck on indexing table or rotary table. The distinctive feature is that the chuck rotates with the spindle of indexing table or rotary table.

气缸防锈处理：在潮湿及工作环境较差的情况，气缸内部经防锈处理，不会生锈或卡死。
防尘装置：工作中的铁屑及切削液不易进入夹盘内部的缸式，确保夹盘的使用寿命及精度保持。
前置式气缸：气缸与夹盘直结设计，确保夹持的稳定性，更方便於组装及操作。

Rustproof treated cylinder:
The cylinder won't get rusty and seized even in wet or high moisture working environment.
Dust and water proof cover:
Prevent metal chips or coolant from entering inside of chuck cylinder to maintain its accuracy and lead to longer service life.
Integral pneumatic cylinder:
⛎ Connect chuck and built-in cylinder to each other directly;thus enables operation stability. Moreover, it is more convenient for installation and operation since the use of draw tube and draw bar are no longer necessary.

规格 Spec 型号 Model	通孔直径 Thru hole dia. mm	活塞面积 Piston Area cm²	柱塞行程 Piston stroke mm	爪行程直径 Jaw stroke Dia. mm
RT-05	16	74	10	4.6
RT-06	20	120	13	5.5
RT-08	30	190	16	6.8
RT-10	43	280	19	8
RT-05T	16	74	10	4.6
RT-06T	20	120	13	5.5

规格 Spec 型号 Model	最高转速 Max RPM	最大设定压力 Max.Pressure kgf/cm²(Mpa)	气压夹持力 Gripping Force At Air Pressure 7kgf/cm²Kgf(KN)	夹持范围 Gripping Range mm	重量 Weight kg
RT-05	51	7(0.7)	1340(13.1)	Ø4-Ø136	9.3
RT-06	41	7(0.7)	2330(22.8)	Ø25-Ø166	15.5
RT-08	33	7(0.7)	3730(36.5)	Ø33-Ø215	28.5
RT-10	26	7(0.7)	5480(53.7)	Ø43-Ø255	42.3
RT-05T	51	7(0.7)	1340(13.1)	Ø4-Ø136	9
RT-06T	41	7(0.7)	2330(22.8)	Ø25-Ø166	15

规格 Spec 型号 Model	A	B	C	D	E	F	G	H	I
RT-05	140	85	16	60	6	180	33	62	14
RT-06	170	93	20	80	7	210	40	73	20
RT-08	215	112	30	110	8	250	42	95	25
RT-10	255	120	43	140	8	290	46	110	30
RT-05T	140	85	16	60	6	180	33	62	14
RT-06T	170	93	20	80	7	210	40	73	20

规格 Spec 型号 Model	J	K	L	M	P	N max	N min	O mx	O min
RT-05	10	25	6-M8×1.25P	PCDØ118	27	26.93	24.62	20.05	6.55
RT-06	12	31	6-M8×1.25P	PCDØ147	27	36.46	33.69	21.55	15.55
RT-08	14	35	6-M10×1.5P	PCDØ185	28	44.92	41.52	29.55	17.55
RT-10	16	40	6-M10×1.5P	PCDØ220	30.5	53.63	49.59	36.55	17.05
RT-05T	10	25	6-M8×1.25P	PCDØ118	27	26.93	24.62	20.05	6.55
RT-06T	12	31	6-M8×1.25P	PCDØ147	27	36.46	33.69	21.55	15.55